Pitts S1-SS Construction Gallery
»
2009
» October 2009
Avionics switch and breakers.
Altitude encoder location.
Altitude encordser location.
Initial attempt at wiring the Transponder.
Each molex connector after crimping.
Molex connector after a touch of soldering
Molex connector after heatshrink.
Trial fit of the molex connectors onto the back of the...
Finished connector wired up.
Power and grounds for the ICOM IC-A200.
Testing it.. yup.. it comes on.
DSC01116
DSC01119
DSC01120
DSC01122
DSC01123
DSC01126
Replaced screws with pop rivets.
BNC Connector. Left side is how the cable came from an...
Elbow BNC connector for the avionics trays (Radio and Xpdr)
Elbow BNC connector for the avionics trays (Radio and Xpdr)
Elbow BNC connector for the avionics trays (Radio and Xpdr)
Don't ever low this in your aircraft.. gasp!
DSC01137
Simon helping me test the VHF .. thanks boy!
DSC01139
12V Power Socket.
DSC01142
Top view of socket.
USB Charger in socket! Neat.
USB Charger in socket! Neat.
DSC01147
DSC01148
DSC01149
USB Charger in place, along with BAT-1.
BAT-1 showing a charge from the "alternator"
Status pics.
Hey, didn't realise my ancient Narco is lit :-)
Wires...
Overall shot.
Disappointing... hm....
Completish avionics wiring from bottom up looking forward.
Completish avionics wiring from underneath looking...
Completish avionics wiring from underneath looking...
Completish avionics wiring from underneath looking at the...
Auxiliary power socket, and the alternator circuit breaker.
Close up of the panel molex connectors and coaxial...
Wirw bundles all tied up.
DSC01182
PTT wiring coming out of the control stick.
Altitude encoder lock safetied.
Main firewall ground.
Main firewall power bus point.
Both power and ground points.
Sideview of the avionics stack.
Side view of the avionics stack.
Smart battery charger keeping my PC680 topped up.
Elbow power connection for the AV80R.
Elbow power connection for the AV80R.
Elbow power connection for the AV80R.
Checking it works... yep, it's charging!
Wow, this heatshrink works well.. before and after.
Power supply for the GPS after heatshrink.
Connection for the second auziliary power socket (idea...
Connection for the second auziliary power socket (idea...
65
Images | Create
web photo albums
with
Jalbum
|
Chameleon
skin |
Help